Frame
Welded steel
Rigid, weather-ready structure
CT Greenhouse high tunnels are NRCS-eligible · see how EQIP funding works
The backyard build
Home Owner's Greenhouse: delivered ready to grow.
Arrives fully assembled and ready to use: a welded-steel, polycarbonate backyard greenhouse with built-in benches and a roof vent that opens automatically on warm days.
Ships fully assembled
Auto-opening roof
Built-in benches
Glazing
8mm twin-wall polycarb
Diffused light, insulating air layer
Ventilation
Auto roof + rear window
Battery-powered thermostat opener
Delivery
Fully assembled
Anchor it, set the dial, and grow
What's standard
Included with every unit:
- Welded steel frame: a rigid, welded structure designed for harsh weather.
- Built-in benches, both sides: 2′-deep benches run the full length of either side, ready for trays and pots on day one.
- Automatic opening roof: battery-powered and thermostatically controlled; takes a DeWalt 20V or Milwaukee M18 pack (not included).
- Sliding front door and operable rear window: the window has a screen for cross-ventilation.
- Pressure-treated baseboard + four ground stakes: a durable footing with corner anchoring included (additional anchoring may be required for your site).
Anchoring and roof opener setup are covered below.
Sizes
Two sizes, same build.
Both sizes have an 8′ peak and come with every standard feature. Pick the footprint that fits your yard.
Some areas need a freight quote added to the price. Tell us where you're located and we'll let you know.
Getting set up
Setup: anchoring and roof opener
Anchoring your greenhouse
Anchor the greenhouse to the ground before use. Four square ground stakes are provided to anchor the corners of the greenhouse, but further anchoring may be required depending on the site conditions and local building regulations.
Concrete footings or screw-type anchors are recommended. Please contact a licensed contractor or your local building department for more information.
Roof opening instructions
Your greenhouse comes with an automatic opening roof operated by a 12-volt battery and thermostat. The roof opener comes wired to a battery terminal that will accept either a DeWalt 20V or a Milwaukee M18 tool battery (not included).
- Insert a charged battery (a DeWalt or Milwaukee pack) into the terminal.
- Set the thermostat dial to the temperature at which you'd like the roof to open.
- Recharge monthly: charge the battery at least once a month for continuous operation.
DeWalt 20V
Milwaukee M18
Want one in your backyard?
Tell us where you're growing and an owner will follow up with lead time, delivery, and a freight quote if your area needs one.
(860) 341-8707 · info@ctgreenhouse.com
Limitation of liability
In no event shall CT Greenhouse's liability exceed the total dollar amount CT Greenhouse has received from Client for the purchase of the Greenhouse.
In no event will CT Greenhouse, its employees, subcontractors and agents be liable for special, indirect or consequential damages, including but not limited to loss of use, lost profits and similar damages.
Polaris theme designed by epicShops