-
#12 Self Tapping Tek Screws
Extra sharp self tapping stainless steel screws with #4 tips. Use the 1.5" screws paired with Neoprene washers to secure polycarbonate sheets.
- Mouse
- Concrete
-
Three-Hole Pipe Strap
These heavy-duty, 3 hole metal pipe straps are used to fasten purlins, hip boards, baseboards, and more. Comes with a predrilled hole on the round part of the strap for a third tek screw to keep it from sliding.
- Mouse
- Concrete
-
1" Neoprene Bonded Washers for polycarbonate (bag of 100)
1'' Neoprene Bonded Washer 100/bag. Use to secure polycarbonate sheet to framing along with #12 x 1.5" tek screws. When tightening do not tighten below the surface of the panel.
- Mouse
- Concrete
Add to Cart The item has been added -
Metal Endwall Angle
L bracket for connecting square tubing at right angles. Angle is 11⁄2” x 2” with three holes for fasteners. Fasten with #14 or #12 x 1” Tek screws.
- Mouse
- Concrete
-
Beveled Brace Bands
These heavy duty galvanized steel brace bands are used to make connections between truss parts, wind braces, and between the bow and your end wall framing. Pair with 5/16 carriage bolts and nuts.
- Mouse
- Concrete
-
1/4" Flat washer (bag of 50)
1/4" flat washers. Pair with 1/4" x 3.25" hex bolt to connect ridge vent arms to racks.
- Mouse
- Concrete
Add to Cart The item has been added -
1/4" Lock nut (bag of 30)
1/4" lock nut. Pair with 1/4" x 3.25" hex bolt to connect ridge vent arms to racks.
- Mouse
- Concrete
Add to Cart The item has been added -
1/4" x 3.25" Grade 8 hex bolt (bag of 30)
1.4" x 3.25" grade 8 hex bolt to connect ridge vent arms to racks
- Mouse
- Concrete
Add to Cart The item has been added -
3/8" Lock nut (bag of 30)
3/8" x 4.5" lock nut. Pair with Hex bolt to connect ridge vent arms to 1.9" bows
- Mouse
- Concrete
Add to Cart The item has been added -
3/8" x 4.5" Hex bolt (bag of 30)
3/8" x 4.5" Hex bolt to connect ridge vent arms to 1.9" bows
- Mouse
- Concrete
Add to Cart The item has been added -
Aluminum splice plate for double wirelock
Used to splice together two pieces of Double Wirelock Base. Most often used on hip boards.
- Mouse
- Concrete
Add to Cart The item has been added -
1/4" Hex Nut (box of 100)
1/4" Hex Nut. Pair with 1" x 1/4" hex bolt and 3-hole pipe strap to secure double wirelock base hip boards to bows.
- Mouse
- Concrete
Add to Cart The item has been added -
Aluminum Fabric Clips
Fastening roll-up side plastic or shade cloth to pipe is a snap with fabric clips. Space every 2' on roll pipe.
- Mouse
- Concrete
-
3/8" Washer (bag of 50)
Used in our greenhouse system along with 3/8" eyebolts to hold roll up sides at the baseboard, and paired with 3/8" x 4.5" hex bolts to attach ridge vent arms to the bows.
- Mouse
- Concrete
Add to Cart The item has been added -
3/8" Nut (box of 50)
Used in our greenhouse system along with 3/8" eyebolts to hold roll up sides at the baseboard.
- Mouse
- Concrete
Add to Cart The item has been added -
Structural Lag Screw 1/4" x 1.5" (box of 200)
Heavy duty screw for baseboards and other wood applications
- Mouse
- Concrete
Add to Cart The item has been added -
#14 1" Sheet Metal Screw (box of 220)
In our greenhouse frames, intended to attach three hole pipe straps to pre-drilled holes for purlin connection.
- Mouse
- Concrete
Add to Cart The item has been added -
3/8" x 8" Eye Bolt
Heavy duty eye bolt with nut. Use for baseboard to hold roll up sides when using Roll-Lock.
- Mouse
- Concrete
Add to Cart The item has been added -
6" Eye Bolt with nut (box of 10)
Eye bolt with nut for securing roll up side wind ropes.
- Mouse
- Concrete
Add to Cart The item has been added -
Add to Cart The item has been added
Hardware
Polaris theme designed by epicShops