-
8mm Clear Polycarbonate Sheet
Clear twin-wall 8 MM polycarbonate sheeting. The perfect glazing choice for any greenhouse covering, translates its many unique features into cost saving benefits. Heavy Gauge – Increased strength. Improved hail protection. Anti-Fog –...
- Mouse
- Concrete
-
#12 Self Tapping Tek Screws
Extra sharp self tapping stainless steel screws with #4 tips. Use the 1.5" screws paired with Neoprene washers to secure polycarbonate sheets.
- Mouse
- Concrete
-
Tufflite 6 mil 4 Year Infrared Greenhouse/High Tunnel Plastic
PRICE HERE IS FOR PICK UP ONLY. CONTACT US FOR PALLET RATE/SHIPPING - PLEASE CALL TO ORDER OR FOR A SHIPPING QUOTE Tufflite InfraredTM is a 4 year, 6 mil, energy saving greenhouse covering. Features single sided Drip-Less, anti- condensate,...
- Mouse
- Concrete
-
Three-Hole Pipe Strap
These heavy-duty, 3 hole metal pipe straps are used to fasten purlins, hip boards, baseboards, and more. Comes with a predrilled hole on the round part of the strap for a third tek screw to keep it from sliding.
- Mouse
- Concrete
-
1" Neoprene Bonded Washers for polycarbonate (bag of 100)
1'' Neoprene Bonded Washer 100/bag. Use to secure polycarbonate sheet to framing along with #12 x 1.5" tek screws. When tightening do not tighten below the surface of the panel.
- Mouse
- Concrete
-
Metal Endwall Angle
L bracket for connecting square tubing at right angles. Angle is 11⁄2” x 2” with three holes for fasteners. Fasten with #14 or #12 x 1” Tek screws.
- Mouse
- Concrete
-
Beveled Brace Bands
These heavy duty galvanized steel brace bands are used to make connections between truss parts, wind braces, and between the bow and your end wall framing. Pair with 5/16 carriage bolts and nuts.
- Mouse
- Concrete
-
Euroemme Heavy Duty Exhaust Fan
EM50 is a further development of the well-recognized and proven EM50 and is the ideal exhaust fan whenever extra high airflow capacity is required. The unique propeller design is self-cleaning and allows the highest efficiency to be reached,...
- Mouse
- Concrete
-
Exhaust Fans (Standard with shutter)
High quality shutter fans for years of service from J&D Manufacturing.
- Mouse
- Concrete
-
-
24' Ridge Vent Rail
24' Long Ridge Vent Rail. Contact us to order or for other lengths.
- Mouse
- Concrete
-
Clear vinyl flashing for ends of ridge vent (12' roll)
12' long roll of 8" wide clear vinyl flashing for ends of ridge vent (cut in half to seal both ends)
- Mouse
- Concrete
-
Black vent rail seal (per foot)
Trim-Lock 1/2" D-Shaped sponge rubber seal. Used to create a weather-tight seal on a rack and pinion ridge vent.
- Mouse
- Concrete
-
-
1/4" Flat washer (bag of 50)
1/4" flat washers. Pair with 1/4" x 3.25" hex bolt to connect ridge vent arms to racks.
- Mouse
- Concrete
-
1/4" Lock nut (bag of 30)
1/4" lock nut. Pair with 1/4" x 3.25" hex bolt to connect ridge vent arms to racks.
- Mouse
- Concrete
-
1/4" x 3.25" Grade 8 hex bolt (bag of 30)
1.4" x 3.25" grade 8 hex bolt to connect ridge vent arms to racks
- Mouse
- Concrete
-
3/8" Lock nut (bag of 30)
3/8" x 4.5" lock nut. Pair with Hex bolt to connect ridge vent arms to 1.9" bows
- Mouse
- Concrete
-
3/8" x 4.5" Hex bolt (bag of 30)
3/8" x 4.5" Hex bolt to connect ridge vent arms to 1.9" bows
- Mouse
- Concrete
-
Wind brace for rack and pinion ridge vent (60")
60" Brace for the end bays of a rack and pinion ridge vent. Sized for 4' bow spacing. Contact us for other configurations.
- Mouse
- Concrete
WHY CT GREENHOUSE?
We’re farmers too — which means we understand what goes into selecting, building, and maintaining a high tunnel. Our team is always on call to help you with advice every step of the way.
Intuitive design makes for fast assembly
Fast shipping and easy delivery
High-quality products from an NRCS-approved vendor